Production Line Sound Insulation Room product introduction:
As a frequently used equipment in noise reduction projects, production line soundproof rooms come in various types, with some differences in size, composition, etc. There will be differences in the design and production of anechoic chambers for different equipment. In the application of various types of equipment, appropriate noise reduction solutions will be designed based on the operation and noise conditions of the equipment. Due to the large number of workers in the workshop, the noise generated by machinery or equipment has a greater impact. At this time, it is a very reasonable solution to use an anechoic chamber to reduce the noise of machinery or equipment.
The function principle of the production line soundproof room is to enclose the noise source in a small space to reduce the external radiation noise. Therefore, the overall structure of the soundproof room must be designed according to the structure of the sound source equipment, and there is no particularly fixed shape or structure.
Generally speaking, it is necessary to use a composite structure with light weight and good sound insulation performance in the design. The sound-proof room must also be equipped with a sound-absorbing lining with a high sound absorption coefficient, etc. According to the working characteristics of some special equipment, industrial anechoic chambers will also adopt vibration isolators, double-layer sealing structures, structures with vents, ventilation duct structures with sound-absorbing materials, etc.

Soundproof room application:
It is suitable for various sizes and types of production equipment in industrial production, such as punch presses, air compressors, electric pumps, boilers, cooling towers, pulverizers, ball mills, generators, air conditioner outdoor units, etc.

Structural features of production line soundproof room:
The design principle of the production line soundproof room is mainly to effectively control the sound source when sound waves propagate. And because not all places are the same, and not all noise sources are the same, so the design of the anechoic room It is a silencer tool that is designed with different sizes and performance according to the actual sound source and place. It needs to be processed and produced according to the actual situation on site.
The soundproof room of the production line adopts a fully enclosed combined structure, which is composed of bottom plate steel, tenons, soundproof panels and other soundproof components. It has the functions of soundproofing, sound absorption, vibration isolation and damping. It is equipped with a vibration isolation system, soundproof doors, double-layer soundproof observation windows, ventilation Heat dissipation, smoke exhaust system, water and electricity access channels, and air inlet and outlet silencer devices. It can isolate the high noise of the equipment and can also be used as the control room of the high-noise workshop. In order to ensure sufficient sound insulation, industrial anechoic chambers generally use galvanized steel plates, aluminum plates and other metal materials. The inner wall of the anechoic chamber is mostly a structure of punched plates covered with sound-absorbing materials, which places the noise inside the anechoic chamber. Block noise from spreading outward. The industrial anechoic chamber is easy to install and disassemble, and can be designed according to the specific usage requirements, equipment operating conditions, and ventilation and heat dissipation requirements of each noise source equipment.

Soundproof room service methods:
Projects across the country can be installed on-site. The raw materials are directly produced by the manufacturer, loaded and sent to the site. The installation master and technicians go to the site to assemble and produce together.